www.robotechcollections.fr - Varitechs & Mechas

Nexx a écrit :Beautyfull collection ! Congratulation !

On en avait déja parlé là les gars : http://www.robotechcollections.fr/forum ... .php?t=267 Bastien ne se la joué pas perso, bande d'endormis !

endormi c'est mon deuxieme prénom.

béta aurait aurait ete plus approprié pour le forum.

Wonderful ! ^^

Les diaporamas sont très bon mais les photos également. L'ensemble est une vraie réussite. Je suis jaloux !

deisuki a écrit :endormi c'est mon deuxieme prénom.

béta aurait aurait ete plus approprié pour le forum.

Alors c'était vrai, on peut les compter, les Beta

Thank you Robotor, Ratatrse, deisuki, and Bastien for dropping by..
Merci Robotor, Ratatrse, deisuki, Bastien et d'être passé ..

and some multiples i've taken out of the box:
et des multiples que j'ai pris hors de leurs boîtes:


All 3 VF-1S Skull Leader Valkyries.. I did the simple customization for VF-1S Max Jenius

Tous les 3 VF-1S Skull Leader Valkyries .. J'ai fait de la simple personnalisation de VF-1S Max JeniuS:



Skull Squadron:




25th Anniv VF-1S(s)



VF-1J Hikaru(s)



VF-1S Roy Focker(s)



Yin-Yang:

Hi Maverick, please can you put VF-1 1/60 V.2 in one of your dioramas to see what that looks like It would be cool

With these dioramas, I hope that I' m going to make a crazy thing
It's my new custom project... my biggest challenge Of my young career.
If all that I have in my mind, I go to show it in diorama... Houuuuu I think that it' s going to be good for my and yours eyes...


PS: Just one indication: 12 Mechas will participate in the diorama






Salut Maverick, pourrais-tu mettre un V2 dans ton diorama pour voir ce que cela donne?

Avec ces dioramas, j'espère pouvoir faire un truc de ouf.
C'est mon nouveau projet custom... et le plus gros challenge de ma jeune carrière.
Si tous ce que j'ai dans ma p'tite tête "d'endormis" (merci Nexx ), j'arrive à le reproduire ds ce diorama, Houuuuu je pense que cela va déchirer grave...

PS: p'tit indice pour les curieux, il y aura au moins 12 mechas dans ce diorama... je me réjouis de le commencer

Nicks: Sure thing.. I will do another photoshoot before the weend ends, my camera's been out of commission, but i'll be getting a new one by wednesday..


Just wanna share my latest project's update:

I have finally started with a large scale version of the launch arm, almost done with the Arm part, I still have a lot of things to figure out especially at how will it be able to hold something as heavy as a yamato valkyrie + fastpacks. and the BP8 durability issue is adding to my concern.. sorry about the crappy pics, just using my cellphone's camera.

Ok... Ma machoir est tombée... avec mes yeux....

Ok My jaws is broken down with my eyes....

spent my last 5 days of nothing but either working on this project or going online..

Day 1: Finished Detailing on ARMD Launch Arm

i've decided to make this part a bit thicker than lineart.. with the weight of a 1/48 Valkyrie and a Fast/Strike parts, using even a styrene sheet wouldn't hold it for prolonged time. Some details not present on the line-art were also added.






Day 2-3: Partially Completed Launch Arm's Wrist and 2 Clamp Fingers

I made a mistake at the Finger Plate area.. the yellow/black stripes should pretty much cover the entire plate. Still have to correct it.





Another stupendous mistake was i didn't test fit the clamp on the valkyrie with strike parts on.. it turned out wider than the valk, good thing i haven't permanently glued the finger part together.. quick fix i can only think is have the fingers angled at 45 degrees..

Day 4-5: Partially Completed ARMD Launch Base Section

Used a combination of styrene sheet, cardboard and mat.. im thinking of reinforcing it further with plywood at the back, depending on how it's gonna hold up.






Here's how it looks like so far when put together:

Great job MaveRick, go on !
The looking of your scratch is very, very good !

yes very good !!

It looks so real... Awesome "scratch" Maverick...

I like your job

Maverick

This looks really really really good Maverick !!!!

1/48 rocks all the way

thank you guys.. i'm working on the "signal arm" right now, hopefully i'll get all done including some adjustments on the manipulator's clamp fingers by the end of this week.

I'm also contemplating on doing another custom, either a 1/48 Scale Replica of the Revell Robotech Factory (where i will house a few VF-1 in GBP Armor and the new 1/60 Destroids), a Macross Factory, or a Macross Zero Anti UN Spacy Hanger/Base (for the 1/60 Yamato SV-51s)

Please, if any of you guys have any screenshots/scans/line-art to any of those, i'd be very glad if you share it to me.


merci les gars .. je travaille sur le "signal bras maintenant, je l'espère je vais tout faire, y compris des ajustements sur le manipulateur de la pince doigts d'ici la fin de cette semaine.

Je suis aussi contempler sur la façon de faire un autre usage, soit un 1 / 48 Scale Replica du Revell Robotech Factory (où i abritera quelques VF-1 en GBP Armor et le nouveau 1 / 60 Destroids), un Macross Factory, ou d'un Macross Zero Anti ONU Spacy Hanger / Base (pour les 1 / 60 de Yamato SV-51s)

Si l'un de vous avez des screenshots / scans / line-art à l'une de celles-ci, je serais très heureux si vous partagez avec moi.

Very great work MaveRicks, i really appreciate You recreate one of my favorite sequence in Macross DYRL (with music...). Go on!!!

Robotech factory like this? i founf only this picture but i think you have it yet...





Super boulot Mavericks, je suis admiratif. Tu recrée un de mes moments préférés de Macross DYRL (le film). bonne continuation.

Usine Robotech comme celle ci? je 'nai trouvé que ça mais j'imagine que tu dois l'avoir également...

Lancer: Thanks for the picture.. got the same pic, but it was of smaller resolution though


did the final changes:

- Finger Plate Area change with reference to the line-art
- Clamp/Fingers shortened instead of my initial plan of having it angled
- Discarded the Acrylic reinforcement
- Discarded Clamp articulation, a small metal c clamp, hidden below the finger plate was used in lieu of the acrylic holder.. basically it's holding the valks back part

a few more additions:
- Signal Arm Made
- added details on the launch wrist part
- applied decals


so.. this is basically my completed ARMD Launch Arm and Base

(sorry mods.. flicker doesn't have a thumbnail link as far as i know, so i opted to post here the reduced "medium res" pics)

Got exhausted at working on my ongoing project.. but still felt bored.. so finally did something else..



First appearance: Episode 1 - "Boobytrap"[2]
Last appearance: Episode 18 - "Pineapple Salad"
Date of death: November 30, 2009

A Tribute to the Orignal Macross Skull Leader - Roy Focker

Woaw Great tribute indeed. Nice job, i really appreciate Thanks for these picks

Amazing!!!

thanks guys.. just got a bit burn out while working on my current project, so i decided to do a quick photo shoot

anyway, i have finally started on my second scratch build. so far i am 60% done on gate 1. here are some pics of it:


merci les gars .. viens de me griller un peu tout en travaillant sur mon projet, j'ai donc décidé de faire une rapide séance photo

anyway, i ont finalement commencé à construire mon deuxième scratch. Jusqu'à présent, je suis à 60% réalisé sur la porte 1. voici quelques photos de lui:















scale check:

catching up with the version 2 1/60 VF-1 and the missing Macross plus valkyrie:

OMG !!!!

All these Valks !!!

You want to make the Prometeus ????

Hé hé

Again with the famous MaveRick Technique, the 2 ex boxes

Hey Guys.. just wanna share my New Display Theme for this year..

Last year, i basically showcased figures that i like from each line. Actually other than macross and anime figures, i've been collecting other lines from Joes, to TF mechas.. to western toys etc..

This year, i've been contemplating at doing an "All Macross Display Theme" since obviously it's been the sole line that i got constantaly hook up and so far have been loving this line. I've managed to unload all previously displayed toys around January this year, but never really got the chance to start setting up since i got hooked up with other stuff, work and the death of a dear friend..

anyways.. 'nuf talk.. here's my Macross Display Theme: (didn't want an all cramp up display so i just choose to display basically the camo valkyries and 2 non-camo scheme that i like)


LOWEST LEVEL - Macross Do You Remember Love





From L to R:

- VF-1A Super Hayao Kakizaki
- VF-1S Strike/Super Hikaru Ichigo
- VF-1S Strike/Super Roy Focket (Skull Leader)
- VF-1S Super Maximilian Jenius

with my first ever scratch build - DYRL ARMD Launch Arm and Base


SECOND LEVEL - Macross Super Dimension Fortress





From L to R:

- VF-1S 25th Anniversary VF-1S (Only non-camo valk i chose to display)
- VF-1J Super Maximilian Jenius
- VF-1J Super Hikaru Ichigo
- VF-1S Super Miria Fallyna
- VF-1A Mass Production Type


THIRD LEVEL - Macross ZERO





wanted an Exhibit like theme for this line.. so made a custom made acrylic labels for each valkyries:



From L to R:

- VF-OA VF-0A Phoenix "Angel" Special Assault Specification (Shin Kudo)
- SV-51 with Dornier Booster (Nora Polyansky)
- Destroid MONSTER
- SV-51 with Dornier Booster (D.D. Ivanov)
- VF-OA VF-0A Phoenix Special Assault Specification (Roy Focker)

FOURTH LEVEL - My Scratch-build Macross Armored Factory and Maintenance Bay








From L to R:

- Destroid Tamahawk
- VF-1S Strike/Super Roy Focker (Version 2)
- VF-1J VF-1J Stealth Valkyrie in Urban Camo GBP Armor

TOP LEVEL - Macross PLUS (New Edwards Base lolz)

- sorry for the crappy pics..







From L to R:

- YF-21 Omega One with Fast Packs (Guld Bowman)
- VF-11B Super Thunderbolt (Isamu Dayson)
- YF-19 Alpha One with Fast Packs and Fold Booster